View 1410200-1_6370290.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

137 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors multigig rt connector 5 table of contents multigig rt connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137-162 product line overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 connector sequencing chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 mating sequencing chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 product selection guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141-143 customization options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144-146 multigig rt tier 1 connector system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147, 148 multigig rt tier 2 connector system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149, 150 connector selection grid for vita 41 vxs compliant connectors . . . . . . . . . . . . . 151-153 connector selection grid for vita 46 vpx compliant connectors . . . . . . . . . . . . . 154-157 new multigig rt stacking connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 power modules and guide hardware reference . . . . . . . . . . . . . . . . . . . . . . . . . . 159-162 vita, vmebus, vpx, and vxs are trademarks of vita.
138 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors multigig rt connector products the multigig rt product line is a backplane intercon- nect family that offers flexi- bility and customization. this printed circuit based, pinless, interconnect family is comprised of modular components which can be used in a variety of combi- nations. the connectors in this innovatively flexible platform can be combined to provide the density, data throughput, and signal integrity required for appli- cations in todays computer, military, medical, or indus- trial control industries. the use of printed circuit wafers in this connector system allows for cost effective sequencing and electrical customization of the con- nector. wafers can be man- ufactured specifically for differential or signal ended performance and the impedance, propagation delay, and crosstalk of the connector can be altered per customer requirements. this scalable board to backplane connector family is a robust, pinless design which eliminates the pin field on backplane boards and reduces the end users exposure to field failure in card cage systems. the multigig rt connector family is designed specifi- cally for 20.30 [.800] or 25.40 [1.00] card pitch systems. multigig rt 1 connector 141 signals/inch, data rates up to 3.125 gb/s multigig rt 2 connector 113 signals/inch, data rates of 3.125 gb/s to 6.4 gb/s and has been demonstrated to support 10 gb/s www.multigigrt.com product facts customizable impedance matched printed circuit wafer interface available for stacking applications inverse sex backplane connector system with pinless interface superior crosstalk performance optimized footprints for signal integrity and ease of board design utilizes a 0.56 [.022] diameter via for backplane connector for lower cost board fabrication three levels of signal contact sequencing available in modular style available for 20.30 [.800] or 25.40 [1.00] card pitch systems durability rated for 200 cycles fully compatible with mp based fiber optic array interconnects complete connector family includes power modules = > maximize amps/inch density, voltages in pairs guidance modules die cast for strength optional esd contact three sequence levels press fit or hardware mounted backplane drill pattern enabled keying cable assembly proposals available multigig rt connector products are fully compatible with 2mm hm equipment practices applications telecommunications equipment metro optical networking equipment sonet switched platforms aggregation switches midrange servers high end servers high speed custom platforms mass data storage rugged, mission-critical applications technical documents application specifications 114-13062 power modules 114-13056 signal connectors product specifications 108-2062 power modules 108-2072 signal connectors qualification test reports 501-538 power connectors 501-544 signal connectors engineering report 502-1130 power connectors routing guide rt 2 on te.com
139 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors multigig rt connector 5 multigig rt connector products (continued) 0 fully-mated wipe length 2.5 mm 3 6 9 12 15 18 21 8.25 mm 9.75 mm 11.25 mm 18.25 mm 20.75 mm esd contact on guide pin key on guide pin 4.0 mm 5.5 mm signal l ev el 1 signal level 2 signal level 3 ground level p ower level 1 p ower level 2 p ower level 3 multigig rt connector sequencing chart
140 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors multigig rt connector products (continued) fully mated reliable mate multigig rt connector mating sequence chart which shows the relation- ship of multigig rt connector products with other te products dim. a dim b. product dim. c fully contact reliable first mate fully mated family mated mate last break wipe length 1.50 12.50 ground shield 16.78 [.661] 17.55 [.691] 4.28 [.169] z-pack hm-zd .059 .492 signal level 2 15.41 [.607] 15.85 [.624] 2.91 [.115] product signal level 1 13.91 [.548] 14.35 [.565] 1.41 [.056] z-pack hm-zd 3.00 12.50 24.0 mm pin 27.50 [1.083] 33.40 [1.315] n/a guide .118 .492 22.2 mm pin 25.70 [1.012] 31.60 [1.244] n/a hardware key blocking point n/a 22.03 [.867] n/a 1.50 12.50 ground pins 16.44 [.647] 17.13 [.674] 3.94 [.155] z-pack tinman .059 .492 signal level 2 14.94 [.588] 15.63 [.615] 2.44 [.096] product signal level 1 n/a n/a n/a 1.50 12.50 signal level 3 18.27 [.719] 18.84 [.742] 5.77 [.227] z-pack 2mm hm .059 .492 signal level 2 16.77 [.660] 17.34 [.683] 4.27 [.168] product signal level 1 15.27 [.601] 15.84 [.624] 2.77 [.109] ground 18.00 [.709] 5.50 [.217] multigig rt 2.50 12.50 signal level 3 18.00 [.709] 5.50 [.217] t1 .098 .492 signal level 2 16.50 [.650] 4.00 [.157] product signal level 1 15.00 [.591] 2.50 [.098] ground 18.00 [.709] 5.50 [.217] multigig rt 2.25 12.50 signal level 3 18.00 [.709] 5.50 [.217] t2 .089 .492 signal level 2 16.50 [.650] 4.00 [.157] product signal level 1 15.00 [.591] 2.50 [.098] multigig rt 5.50 12.50 power level 3 23.75 [.935] 11.25 [.443] power .217 .492 power level 2 22.25 [.876] 9.75 [.384] module power level 1 20.75 [.817] 8.25 [.325] multigig rt 12.50 guide pin key 33.25 [1.309] n/a 20.75 [.817] guide n/a .492 hardware guide esd contact 30.75 [1.211] 18.25 [.719] 1.50 12.50 ground 17.08 [.672] 17.60 [.693] 4.78 [.188] z-pack hs3 .059 .492 signal level 2 16.05 [.632] 16.47 [.648] 3.75 [.148] product signal level 1 14.55 [.573] 14.97 [.589] 2.25 [.089] 3.50 12.50 power level 3 20.25 [.797] 20.95 [.825] 8.10 [.319] upm .138 .492 power level 2 18.65 [.734] 19.35 [.762] 6.50 [.256] power level 1 17.03 [.670] 17.73 [.698] 4.88 [.192] upm 5.75 12.50 guide pin key 31.39 [1.236] 36.16 [1.424] n/a guide .226 .492 keyed guide pin 31.39 [1.236] 36.16 [1.424] n/a hardware keyed guide pin 35.23 [1.387] 40.00 [1.575] n/a premate power 5.61 [.221] multi-beam xl level 1 16.84 [.663] min. right angle postmate power 4.34 [.171] header to 5.08 14.73 level 2 17.81 [.701] min. vertical .200 .580 premate signal 3.81 [.150] receptacle level 2 18.26 [.719] min. postmate signal 2.54 [.100] level 3 19.53 [.769] min. premate power 5.61 [.221] level 1 15.32 [.603] min. multi-beam xl postmate power 4.34 [.171] right angle 3.81 13.21 level 2 16.28 [.641] min. receptacle .150 .520 premate signal 3.81 [.150] to vertical level 2 16.74 [.659] min. header postmate signal 2.54 [.100] level 3 18.01 [.709] min.
141 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors multigig rt connector 5 multigig rt connector products (continued) multigig rt connectors consist of interlocking left end and right end signal modules (half or full), center signal modules, and stand alone modules available in vertical receptacles (back- plane application) and right angle plugs (daughtercard application), and comple- mentary mechanical guide assemblies (available in size 10.80 [.425], 9.00 [.354] or 7.20 [.283]. the guide assembly provides blind mating and misalignment for the connectors. the 10.80 [.425] and 9.00 [.354] guide assembly also provides keying and is available with or without an internal contact for electrostatic discharge (esd) protection. the modules are capable of being stacked in any configuration within the limi- tations given in this catalog to a maximum length of 120 between guide assemblies. these connectors perform at two separate density levels: tier 1 and tier 2. the connectors are placed on the pc board by manually-operated or automatic machines. the modules have 6, 8, or 10 rows of signal contacts with 20.30 [.800], 25.40 [1.000], or 9.00 [.354] centerline spacing (profile size). a right angle plug module having 7 rows with 20.30 [.800] spacing is also available for tier 2 only to accommodate special applications used by the vmebus international trade association (vita). the signal contacts, along with the ground contacts (in tier 1 modules only) and esd contacts (if using the 10.80 [.425] guide assembly with esd contact) provide sequencing for each group of modules. when corresponding with personnel, use the terminol- ogy provided to facilitate your inquiries for information. basic terms and features of this product are provided in the art below and on the fol- lowing page. vertical receptacle (backplane) connector product selection guide half left end module full left end module full right end module 10.8 mm guide pins 7.2 mm guide pin stand alone module vyeshtkk center module vyeshtkk dtppew nif rt nif half right end module vyeshtkk vyeshtkk itzxnsl hwtzsh dtsyegy )ls wniw 2 sspf* ptzsynsl ttxy ]nym vgwid itpi ptzsynsl ttxy ]nym wmwiehx ptzsynsl ttxy ffi.tk.riihpi dtrupnesy tns vnlsep dtsyegy ttpewngeynts ttxy ttpewngeynts ttxy ttpewngeynts unf ttpewngeynts vpty ttpewngeynts vpty dtsyegy decnynix vita, vmebus, vpx, and vxs are trademarks of vita.
142 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors multigig rt connector products (continued) signal modules tier 1 and tier 2 recepta- cles contain eye-of-needle compliant pin signal con- tacts; the tier 1 receptacle also contains ground con- tacts. each housing fea- tures standoffs for thermal venting, polarization ribs (on end modules) and polarization slots (on the center module) for proper stacking of the modules, and polarization posts to ensure correct orientation on the pc board. plugs contain eye-of-needle compliant pin signal contacts and pc wafers (blades). the housing features alignment pins to ensure correct orientation on the pc board. guide assemblies the guide assembly consists of a guide pin (used with receptacles) and a guide module (used with plugs). the guide pin features a collar and mounting post (having a screw hole or threads) with or without a key. the guide pins are available with various length mounting posts. the mount- ing post is used with cus- tomer supplied hardware to attach the guide pin to the pc board. guide pins must be chosen according to thickness of pc board being used; otherwise, interfer- ence with proper mating or damage to system compo- nents will occur. guide pins with keys are available in various keying positions. the guide module features a housing with or without a key and with a screw hole, mounting post, and pilot post. the mounting post and pilot post are used to position the guide module on the pc board, and the screw hole is used with customer supplied hard- ware to attach the module to the pc board. the 10.80 [.425] and 9.00 [.354] guide module is available with or without an esd contact located inside the module. right angle plug (daughtercard) connector product selection guide (continued) half left end module full left end module full right end module 10.8 mm guide module 7.2 mm guide module stand alone module half right end module center module housing pc wafers (blades) alignment pin esd contact (inside module) (optional) housing pilot post screw hole mounting post key no key contact pads eye-of-needle compliant pin signal contact
143 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors multigig rt connector 5 multigig rt connector products (continued) possible module configurations used with power modules three signal modules and one power module product selection guide (continued) guide pin guide pin power receptacle module receptacle full left end module* receptacle center module receptacle full right end module* guide module guide module power plug module plug full left end module* plug center module plug full right end module* two and one-half signal modules and one power module guide pin guide pin power receptacle module receptacle left end module receptacle center module receptacle full right end module* guide module guide module power plug module plug left end module plug center module plug full right end module* four signal modules with one power module guide pin guide pin power receptacle module receptacle full left end module* receptacle center module receptacle full right end module* guide module guide module power plug module plug full left end module* plug center module receptacle center module plug center module plug full right end module* * a half left end module and a half right end module can be used instead.
144 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors multigig rt connector products (continued) customization options the multigig rt product line is fully customizable. this is accomplished by means of stacking the pcb wafers in the correct location to achieve the desired mix of high speed differential, high speed single-ended, and low speed/high speed density signals. in addition, power can be carried through the pcb wafers by replacing one or more signal wafers for a power wafer. shown below is a te proposal for a typical multigig rt connector application. as you can see, we took full advantage of the multigig rt connector capabilities. contact your te representative to have a proposal drawn-up to meet your specific needs. typical multigig rt connector implementation multigig rt 7.2mm guide receptacle multigig rt 2 20.3mm center plug 16 differential pair wafers (3 pairs each) multigig rt 2 20.3mm center plug 16 open pin field wafers (9 single-ended lines each) multigig rt 2 20.3mm right end plug 16 open pin field wafers (9 single-ended lines each) multigig rt 2 20.3mm right end plug 3 open pin field wafers (9 single-ended lines each) 8 single-ended wafers (6 lines each) 2 power wafers (3 lines each)
145 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors multigig rt connector 5 multigig rt connector products (continued) tier 1 options customization options (continued) the tier 1 connector system can be customized with differential and single- ended wafers. in addition, a power wafer is available for the 25.40 [1.000] pitch product that provides 4 power lines and 2 sense lines per wafer. shown below are differential, single-ended and power options.
146 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors multigig rt connector products (continued) tier 2 options signal options available: 0.8" shown differential wafers single-ended w/ 1:1 s/g ratio single-ended w/ 2:1 s/g ratio open pin field (no reference ground) mixed, differential and s/e lines custom, vita 41, mixed up to 4 power lines/wafer total of 19 amps/wafer customization options (continued) the tier 2 connector system is fully customizable due to the lack of a bussed ground system. this allows us to stack the many options available (with more being developed as needed) in any configuration that is necessary to meet the cus- tomers needs. shown here are some of the options that are currently available. vita, vmebus, vpx, and vxs are trademarks of vita.
147 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors multigig rt connector 5 multigig rt tier 1 connector system target applications high speed telecommunica- tions equipment midrange and high-end servers networking equipment blindmate design high speed custom platforms mass data storage rugged, mission-critical applications product features excellent performance to 3.125 gb/s high density: 140 contacts per inch provides 70 contact pairs per inch for differential signaling options include 20.32 [.800] and 25.40 [1.000] pitch card spacing modular options for signal, power, keying and guidance optimized footprints robust design low noise levels supports differential pair widths of 6 mils with 9 mil spacings single-ended option available; contact te for performance data the multigig rt tier 1 connector meets customer requirements for high-density and high-performance two-piece interconnects. in te and independent lab tests, the multigig rt tier 1 connector has performed in excess of 3 gb/s using standard fr-4 board mate- rial and routing techniques. the multigig rt tier 1 connector is a differential connector with a contact density of 70 pairs per inch. the robust connector uses daughtercard plugs with a printed circuit board (pcb) wafer design and back- plane receptacles with a completely enclosed dual- beam design. all signal lines use redundant points of contact for high reliability. the multigig rt tier 1 connector is available for both 20.32 [.800] and 25.40 [1.000] pitch card spacing. the totally modular system allows flexibility in choosing signal and power modules as well as guidance, keying, and electrostatic discharge (esd) modules to meet the most demanding applica- tions. signal modules can be customized for specific electrical requirements such as sequencing that are critical in high speed applications. power modules are available with two- and four-voltage options, each circuit capa- ble of carrying 20 amps. the robust metal guide pin provides eight keying options and a unique esd contact to discharge static when daughtercards are hot-plugged. availability fully validated spice models: e-mail requests to modeling@te.com pro/e models and iges models: e-mail requests to tecad@te.com www.te.com iges is a trademark of iamba networks, inc. pro/e is a trademark of parametric technology corp.
148 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors multigig rt tier 1 connector system (continued) note: all part numbers are rohs compliant. mechanical design summary mechanical features extremely rugged connector for mission critical applications three signal sequencing levels plus an additional three power sequencing levels keyed guide modules standard: cannot mate connector incorrectly, and provide 3 mm of gather options available include: power modules electrostatic discharge guide pins multiple guide pin keying options high signal density: 70 pairs for differential signals 20.30 [.800] pitch connector type style no. of signal part cols. pattern number center 16 n/a 1410200-1 stand alone 16 n/a 1410420-1 (backplane) half left 8 n/a 1410226-1 receptacle half right 8 n/a 1410227-1 full left 16 n/a 1410201-1 full right 16 n/a 1410202-1 center 16 s.e. 1410205-1 16 diff. 1410205-2 stand alone 16 s.e. 1410421-1 16 diff. 1410421-2 half left 8 s.e. 1410228-1 (daughtercard) 8 diff. 1410228-2 plug half right 8 s.e. 1410229-1 8 diff. 1410229-2 full left 16 s.e. 1410206-1 16 diff. 1410206-2 full right 16 s.e. 1410207-1 16 diff. 1410207-2 25.40 [1.00] pitch connector type style no. of signal part cols. pattern number center 16 n/a 1410210-1 stand alone 16 n/a 1410412-1 (backplane) half left 8 n/a 1410231-1 receptacle half right 8 n/a 1410230-1 full left 16 n/a 1410211-1 full right 16 n/a 1410212-1 center 16 s.e. 1410215-1 16 diff. 1410215-2 stand alone 16 s.e. 1410413-1 16 diff. 1410413-2 half left 8 s.e. 1410232-1 (daughtercard) 8 diff. 1410232-2 plug half right 8 s.e. 1410233-1 8 diff. 1410233-2 full left 16 s.e. 1410216-1 16 diff. 1410216-2 full right 16 s.e. 1410217-1 16 diff. 1410217-2 the drawings below show the nominal dimensions for the multigig rt 1 connector modules dim. 20.32 [.800] 25.40 [1.000] connector connector a 16.10 16.10 .630 .630 b 21.60 27.40 .850 1.080 c 18.40 24.20 .720 .950 d 28.70 28.70 1.130 1.130 e 21.60 27.40 .850 1.080 f 18.40 24.20 .720 .950 dim. 20.32 [.800] 25.40 [1.000] connector connector r = 17.00 r = 17.00 aa .067 .067 l = 15.20 l = 15.20 .600 .600 bb 10.50 10.50 .410 .410 cc 18.60 24.40 .730 .960 dd 28.70 28.70 1.130 1.130 ee 10.50 10.50 .410 .410 ff 18.60 24.40 .730 .960 a c dd ee ff aa bb cc b d f e plug (daughtercard) left/right end module center module receptacle (backplane) left full end module right full end module stand alone backplane stand alone daughtercard
149 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors multigig rt connector 5 multigig rt tier 2 connector system target applications high speed telecommunica- tions equipment midrange and high-end servers networking equipment blindmate design high speed custom platforms mass data storage rugged, mission-critical applications product features excellent performance to 6.25+ gb/sC high density: 113 contacts per inch provides 56 contact pairs per inch for differential signaling options include 20.32 [.800] and 25.40 [1.000] pitch card spacing modular options for signal, power, keying and guidance optimized footprints robust design low noise levels supports differential pair widths of 6 mils with 9 mil spacings single-ended, open pin field and power wafers available the multigig rt tier 2 connector is the latest product release to meet customer requirements for high-density and high- performance two-piece interconnects. in te and independent lab tests, the multigig rt tier 2 connector has performed in excess of 6 gb/s using standard fr-4 board mate- rial and routing techniques, and has been demon- strated to 10 gb/s . the multigig rt tier 2 connector system provides the flexibility to configure the daughtercard for differential, single-ended, open pin field, or power within a single connector module. all of these options then mate into a common backplane receptacle. the robust connector uses daughtercard plugs with a printed circuit board (pcb) wafer design and back- plane receptacles with a completely enclosed dual- beam design. all signal lines use redundant points of contact for high reliability. the multigig rt tier 2 connector is available for both 20.32 [.800] and 25.40 [1.000] pitch card spacing. the totally modular system allows flexibility in choosing signal and power modules as well as guidance, keying, and electrostatic discharge (esd) modules to meet the most demanding applica- tions. signal modules can be customized for specific electrical requirements such as sequencing that are critical in high speed applications. power modules are available with two- and four-voltage options, each circuit capa- ble of carrying 20 amps. the robust metal guide pin provides eight keying options and a unique esd contact to discharge static when daughtercards are hot-plugged. availability fully validated spice models: e-mail requests to modeling@te.com pro/e models and iges models: e-mail requests to tecad@te.com www.te.com iges is a trademark of iamba networks, inc. pro/e is a trademark of parametric technology corp.
150 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors multigig rt tier 2 connector system (continued) note: all part numbers are rohs compliant. mechanical design summary 20.30 [.800] pitch connector type style no. of signal part cols. pattern number center 16 n/a 1410140-1 stand alone 16 n/a 1410133-1 (backplane) half left 8 n/a 1410186-1 receptacle half right 8 n/a * full left 16 n/a 1410141-1 full right 16 n/a 1410142-1 right end 18 n/a 1410456-1 center 16 s.e. * 16 diff. 1410137-1 stand alone 16 s.e. * 16 diff. 1410134-1 half left 8 s.e. * (daughtercard) 8 diff. * plug half right 8 s.e. * 8 diff. * full left 16 s.e. * 16 diff. 1410138-1 full right 16 s.e. * 16 diff. 1410139-1 * contact te. 25.40 [1.00] pitch connector type style no. of signal part cols. pattern number center 16 n/a 1410127-1 stand alone 16 n/a 1410131-1 (backplane) half left 8 n/a * receptacle half right 8 n/a * full left 16 n/a 1410129-1 full right 16 n/a 1410128-1 center 16 s.e. * 16 diff. 1410123-1 stand alone 16 s.e. * 16 diff. 1410132-1 half left 8 s.e. * (daughtercard) 8 diff. * plug half right 8 s.e. * 8 diff. * full left 16 s.e. * 16 diff. 1410124-1 full right 16 s.e. * 16 diff. 1410125-1 * contact te. the drawings below show the nominal dimensions for the multigig rt 2 connector modules dim. 20.32 [.800] 25.40 [1.000] connector connector a 16.10 16.10 .630 .630 b 21.60 27.40 .850 1.080 c 18.40 24.20 .720 .950 d 28.70 28.70 1.130 1.130 e 21.60 27.40 .850 1.080 f 18.40 24.20 .720 .950 dim. 20.32 [.800] 25.40 [1.000] connector connector r = 17.00 r = 17.00 aa .067 .067 l = 15.20 l = 15.20 .600 .600 bb 10.50 10.50 .410 .410 cc 18.60 24.40 .730 .960 dd 28.70 28.70 1.130 1.130 ee 10.50 10.50 .410 .410 ff 18.60 24.40 .730 .960 a c dd ee ff aa bb cc b d f e plug (daughtercard) left/right end module center module receptacle (backplane) left full end module right full end module stand alone backplane stand alone daughtercard
151 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors multigig rt connector 5 connector selection grid for vita 41 vxs compliant connectors note: all part numbers are rohs compliant. connector description part number p0 tier 2, 7 row, center module, 1410147-1 20.30 [.800] pitch, right angle p5 tier 2, left end module, 1410138-1 20.30 [.800] pitch, right angle p4 tier 2, center module, 1410137-1 20.30 [.800] pitch, right angle p3 tier 2, center module, 1410137-1 20.30 [.800] pitch, right angle p2 tier 2, right end module, 1410139-1 20.30 [.800] pitch, right angle p1 tier 1, monolithic, 1410421-1 20.30 [.800] pitch, right angle connector description part number j0 tier 2, center module, 1410135-1 20.30 [.800] pitch, vertical j5 tier 2, left end module, 1410141-1 20.30 [.800] pitch, vertical j4 tier 2, center module, 1410140-1 20.30 [.800] pitch, vertical j3 tier 2, center module, 1410140-1 20.30 [.800] pitch, vertical j2 tier 2, right end module, 1410142-1 20.30 [.800] pitch, vertical j1 tier 1, monolithic module, 1410420-1 20.30 [.800] pitch, vertical product facts 10+ gbps performance differential, single-ended and power customizable impedance matched printed circuit wafer interface backplane connector system with pinless interface superior crosstalk performance optimized footprints for signal integrity and ease of board design utilizes a 0.56 [.022] diameter via for backplane connector for lower cost board fabrication three levels of signal contact sequencing modular connector system available for 20.30 [.800] or 25.40 [1.00] card pitch systems provides esd protection complete connector family includes power modules guidance modules the vita 41 vxs product line is a backplane intercon- nect family that offers flexi- bility and customization. vxs is an ansi standard that combines parallel vmebus technology with enhancements to support switched serial fabrics including pci express, rapidio, starfabric and infiniband over a new high speed p0 connector. backward compatibility is maintained with existing backplanes that do not have a conflicting p0 scheme. combining the vme2esst parallel bus with switch fabric technologies for multi-point, high-speed data transfers creates choices for embedded computing designs of all types. under the vita 41 vxs specifica- tion, vmebus cards (now called payload cards) are connected via a high-speed p0 connector. each payload card has two 4x vxs ports (port a and port b) to con- nect to other boards in the system. each vxs port is comprised of 4 hss links running at speeds up to 2.5gbps or 3.125gbps. applications military aerospace and defense rugged, mission critical applications mass data storage high-end and mid-range servers telecommunications equipment infiniband is a trademark of the infiniband trade association. pci express is a trademark of pci-sig. rapidio is a trademark of rapidio, inc. starfabric is a trademark of stargen, inc. vita, vmebus, vpx, and vxs are trademarks of vita. check out the website http://www.vita.com/vso-stds.html
152 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors connector selection grid vita 41 vxs compliant connectors (continued) note: all part numbers are rohs compliant. j1 j0 j2 right end module p art number 1410135-x p2 p0 p1 vme 64 extension p art number 148452-5 vme 64 extension p art number 1-148445-5 center module p art number rt2 1410147-1 payload board and payload slot left end module p art number 1410141-1 j5 j4 j3 j2 j1 full stand alone p art number 1410420-1 p ower module right end module p art number 1410142-1 center module p art number 1410140-1 center module p art number 1410140-1 left end module p art number 1410138-1 p5 p4 p3 p2 p1 p ower module full stand alone p art number 1410421-1 right end module p art number 1410139-1 center module p art number 1410137-1 center module p art number 1410137-1 switch board and switch slot vita, vmebus, vpx, and vxs are trademarks of vita. check out the website http://www.vita.com/vso-stds.html
153 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors multigig rt connector 5 connector selection grid vita 41 vxs compliant connectors (continued) note: all part numbers are rohs compliant. rj0 p art number 1410474-3 integral guidance provided latch cavity shown metal latch for cable assembly only backplane rear transition reference front pa yload backplane interim solution rp0 p art number 1410473-1 rj0 p art number 1410992-3 rp0 p art number 1410303-1 vxs vmebus switched serial payload rear transition module vita, vmebus, vpx, and vxs are trademarks of vita. check out the website http://www.vita.com/vso-stds.html
154 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors connector selection grid for vita 46 vpx compliant connectors product facts 10+ gbps performance differential, single-ended and power customizable impedance matched printed circuit wafer interface backplane connector system with pinless interface superior crosstalk performance optimized footprints for signal integrity and ease of board design utilizes a 0.56 [.022] diameter via for backplane connector for lower cost board fabrication three levels of signal contact sequencing modular connector system available for 20.30 [.800] or 25.40 [1.00] card pitch systems provides esd protection complete connector family includes power modules guidance modules the vita 46 vpx product line is a backplane intercon- nect family that offers levels of flexibility and customiza- tion never before seen in the industry. vpx provides high-speed data rates that traditional vme is not designed for; by merging the latest packaging and connector technology with the latest bus and serial technology. this printed circuit based, pinless, interconnect family is comprised of modular components which can be used in a variety of combi- nations. vpx dramatically increases bandwidth with fewer pin counts and enables heterogeneous architectures to help pre- serve existing investments in technology and systems. the multigig rt product offers new 7-row high- speed connector modules that support vpx data rates. applications military aerospace and defense rugged, mission critical applications mass data storage high-end and mid-range servers telecommunications equipment vita, vmebus, vpx, and vxs are trademarks of vita. check out the website http://www.vita.com/vso-stds.html
155 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors multigig rt connector 5 connector selection grid for vita 46 vpx compliant connectors (continued) note: all part numbers are rohs compliant. p0 left end half module p art number 1410189-3 utility j0 left end half module p art number 1410186-1 j1 center module p art number 1410140-1 j3 center module p art number 1410140-1 j4 center module p art number 1410140-1 j5 center module p art number 1410140-1 j6 right end module p art number 1410142-1 j2 right end module p art number 1410142-1 p1 center module p art number 1410187-3 differential p2 center module p art number 1410187-3 differential or p art number 1410190-3 single-ended (5:2) p3 center module p art number 1410187-3 differential or p art number 1410190-3 single-ended (5:2) p4 center module p art number 1410187-3 differential or p art number 1410190-3 single-ended (5:2) p6 center module p art number 1410187-3 differential or p art number 1410190-3 single-ended (5:2) keying guide module p art number 1-1469492-x daughterca rd ba ckplane p5 center module p art number 1410187-3 differential or p art number 1410190-3 single-ended (5:2) keying guide module p art number 1-1469492-x keying guide module p art number 1-1469492-x keying guide pin p art number 1-1469491-x keying guide pin p art number 1-1469491-x keying guide pin p art number 1-1469491-x vita 46 vpx compliant connectors vita, vmebus, vpx, and vxs are trademarks of vita. check out the website http://www.vita.com/vso-stds.html
156 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors connector selection grid for vita 46 vpx compliant connectors (continued) note: all part numbers are rohs compliant. p0 left end half module p art number 1410189-3 utility j0 left end half module p art number 1410186-1 j1 center module p art number 1410140-1 j3 center module p art number 1410140-1 j4 center module p art number 1410140-1 j5 center module p art number 1410140-1 j6 right end module p art number 1410142-1 j2 right end module p art number 1410142-1 p1 center module p art number 1410187-3 differential p2 center module p art number 1410187-3 differential or p art number 1410190-3 single-ended (5:2) p3 center module p art number 1410187-3 differential or p art number 1410190-3 single-ended (5:2) p4 center module p art number 1410187-3 differential or p art number 1410190-3 single-ended (5:2) p6 center module p art number 1410187-3 differential or p art number 1410190-3 single-ended (5:2) keying guide module p art number 1-1469492-x p ayload card rear transition module backplane p5 center module p art number 1410187-3 differential or p art number 1410190-3 single-ended (5:2) keying guide module p art number 1-1469492-x keying guide module p art number 1-1469492-x ke yed guide pin kit p art number 1410956-1 ke yed guide pin kit p art number 1410956-1 ke yed guide pin kit p art number 1410956-1 rear transition module vita, vmebus, vpx, and vxs are trademarks of vita. check out the website http://www.vita.com/vso-stds.html
157 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors multigig rt connector 5 connector selection grid for vita 46 vpx compliant connectors (continued) note: all part numbers are rohs compliant. rp1 center module p art number 1410975-3 differential or center module p art number 1410970-3 rp3 center module p art number 1410975-3 differential or right end module p art number 1410190-3 single ended rp5 center module p art number 1410975-3 differential or center module p art number 1410190-3 single ended rp4 center module p art number 1410975-3 differential or center module p art number 1410190-3 single ended rp6 center module p art number 1410975-3 or center module p art number 1410190-3 rp2 left end half module p art number 1410971-3 or center module p art number 1410972-3 keying guide module p art number 1-1469492-x keying guide module p art number 1-1469492-x keying guide module p art number 1-1469492-x rp0 center module p art number 1410968-3 ke yed guide pin kit p art number 1410956-1 ke yed guide pin kit p art number 1410956-1 ke yed guide pin kit p art number 1410956-1 rj0 center module p art number 1410964-1 or center module p art number 1410965-1 rj1 center module p art number 1410966-1 or center module p art number 1410140-1 rj4 center module p art number 1410140-1 rj5 center module p art number 1410140-1 rj6 center module p art number 1410140-1 rj2 right end half module p art number 1410186-1 rj3 right end module p art number 1410142-1 p ayload card rear transition module backplane rear transition module (continued) vita, vmebus, vpx, and vxs are trademarks of vita. check out the website http://www.vita.com/vso-stds.html
158 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors new multigig rt stacking connector note: all part numbers are rohs compliant. product facts variable stack height 25mm to 45mm+ interposer part numbers 1410195-1 (spaced for 30mm stack height) 1410196-1 (spaced for 30mm stack height) 14101xx-1* (spaced for any specification needed) modular construction 0.8 inch (85 single ended lines/inch; 43 differential pairs/inch) (available today) 1.0 inch (113 single ended lines/inch; 56 differential pairs/inch) wafer configurations differential open pin field power electrical performance based on multigig rt tier 2 product construction (10 gig performance) compliant pin technology (flat rock board assembly) qualified interface multigig rt tier 2 product (product specification 108-2072) qualification report 501-544 *typically less than $10,000 nre and 6 weeks lead time multigig rt stacking connectors are customizable to any stack heights needed.* .8" pitch multigig rt stacking connector dimensions mated part number ab stack height 21.00 20.00 30.00 1410195-1 .827 .787 1.181 33.00 32.00 42.00 1410196-1 1.299 1.260 1.654 mating 20.30 [.800] pitch receptacles found on page 148. 18.40 [.724] 13.50 [.531] 15 plcs. column 1 indicator column 1 indicator 1.80 [.071] a b 28.68 [1.129] new!
159 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors multigig rt connector 5 power modules and guide hardware reference note: all part numbers are rohs compliant. tin-lead parts are rohs compliant through exemption for lead in press-fit connectors. 13.70 [.539] 3.60 [.142] ref. 3.00 [.118] 2.00 [.079] typ. mating point pin 1a typ. 8.45 [.338] 15.25 [.600] 3.50 [.138] 2.00 [.079] 0.75 [.030] 2 plcs. ref. 3.18 [.125] 16.25 [.640] housing contact section y-y y y 3.00 [.118] 1.625 [.064] 3.60 [.142] 4 plcs. plated through hole 12 plcs. mating header footprint center lines daughter card primary side connector outline recommended pcb hole layout 1 pcb hole dim. drilled hole = 0.70 0.02 [.028 .001 ] finished hole = 0.60 0.05 [.024 .002 ] cu thickness = 0.025 C 0.50 [.0010 C.020] snpb thickness = 0.015 [.0006] max. 1 13.70 [.539] 3.60 [.142] ref. 3.00 [.118] 2.00 [.079] typ. mating point pin 1a typ. 15.65 [.616] 15.25 [.600] 3.50 [.138] 2.00 [.079] 0.75 [.030] 4 plcs. ref. 3.18 [.125] 16.25 [.640] housing contact section y-y y y 3.00 [.118] 1.625 [.064] 3.60 [.142] 4 plcs. plated through hole 24 plcs. mating header footprint center lines daughter card primary side connector outline recommended pcb hole layout 3 plcs. 1 pcb hole dim. drilled hole = 0.70 0.02 [.028 .001 ] finished hole = 0.60 0.05 [.024 .002 ] cu thickness = 0.025 C 0.50 [.0010 C.020] snpb thickness = 0.015 [.0006] max. 1 part number 1410278-1 2-position vertical receptacle part number 1410270-1 4-position vertical receptacle
160 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors power modules and guide hardware reference (continued) note: all part numbers are rohs compliant. tin-lead parts are rohs compliant through exemption for lead in press-fit connectors. 14.70 [.579] 1 18.00 [.709] ref. pin 1a 17.80 [.701] 5.50 [.217] 2.00 [.079] 3.50 [.138] ref. t yp. 33.38 [1.314] housing contact section y-y y y 3.60 [.142] 3.60 [.142] 5 plcs. plated through hole 24 plcs. primary side of backplane connector outline recommended pcb hole layout 3 plcs. 1 pcb hole dim. drilled hole = 0.70 0.02 [.028 .001 ] finished hole = 0.60 0.05 [.024 .002 ] cu thickness = 0.025 C 0.50 [.0010 C .020] snpb thickness = 0.015 [.0006] max. 1 2.00 [.079] t yp. 17.75 [.699] daughtercard edge 6.00 [.236] ref. 5.50 [.217] ref. 18.40 [.724] l 2 3 4 14.70 [.579] 18.00 [.709] ref. pin 1a 10.60 [.417] 5.50 [.217] 2.00 [.079] 3.50 [.138] ref. typ. 33.38 [1.314] housing section y-y y y 3.60 [.142] 3.60 [.142] 5 plcs. plated through hole 12 plcs. primary side of backplane connector outline recommended pcb hole layout 3 plcs. 1 pcb hole dim. drilled hole = 0.70 0.02 [.028 .001 ] finished hole = 0.60 0.05 [.024 .002 ] cu thickness = 0.025 C 0.5 [.0010 C .020] snpb thickness = 0.015 [.0006] max. 1 2.00 [.079] typ. 17.75 [.699] daughtercard edge 6.00 [.236] ref. 5.50 [.217] ref. 18.40 [.724] 1 contact l 2 part number 1410271-x 4-position right angle plug part number 1410279-x 2-position right angle plug xn1g ] dg. wn.hqn k wn.hqn l :q1>i. 13.75 13.75 1410279-1 .541 .541 13.75 12.25 1410279-2 .541 .482 13.75 10.75 1410279-3 .541 .423 10.75 10.75 1410279-4 . 423 .423 12.25 10.75 1410279-5 .482 .423 12.25 12.25 1410279-6 .482 .482 ceh- i mxmo bxqeot 0 bxqeot 1 bxqeot 2 bxqeot 3 kphzam 13.75 13.75 13.75 13.75 1410271-1 .541 .541 .541 .541 12.25 13.75 13.75 12.25 1410271-2 .482 .541 .541 .482 12.25 13.75 13.75 10.75 1410271-3 .482 .541 .541 .423 10.75 13.75 13.75 10.75 1410271-4 . 423 .541 .541 .423 12.25 13.75 12.25 10.75 1410271-5 .482 .541 .482 .423 12.25 12.25 12.25 12.25 1410271-6 .482 .482 .482 .482 10.75 12.25 12.25 10.75 1410271-7 . 423 .482 .482 .423 10.75 10.75 10.75 10.75 1410271-8 . 423 . 423 . 423 .423 10.75 13.75 12.25 10.75 1410271-9 . 423 .541 .482 .423 12.25 10.75 10.75 12.25 1-1410271-0 .482 . 423 .541 .482
161 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors multigig rt connector 5 power modules and guide hardware reference (continued) note: all part numbers are rohs compliant. mounting screw for 9.0 mm guide modules part number 1410946-1 and 5.0 mm guide modules part number 1410946-2 1.50 [.059] ? 5.50 [.217] 0.50 [.020] max. 3.50 [.138] 7.2 mm wide, no key 7.08 [.279] 7.30 [.287] 7.40 [.291] 4.10 [.161] across flats 18.60 [.732] 1.85 [.073] 25.33 [.997] 8.35 [.329] 300' ref. - z - - z - c l of a pin part number 1-1410710-x 7.10 [.280] 31.88 [1.255] 18.40 [.724] 4.00 [.157] 3.70 [.146] 15.63 [.615] 10.50 [.413] 3.88 [.153] guide module part number 1410714-2 9.0 mm wide, with keying 7.40 [.291] 24.00 [.945] ? 9.00 [.354] 2.00 [.079] 1.50 0.03 [.059 .001 ] g pin part number 1-1469491-x 5.00 [.197] 12.48 [.491] 5.50 [.217] 5.50 [.217] 5.25 [.207] measured counterclockwise top of motherboard edge of daughtercard 2 plcs. 1.30 0.10 [.051 .004 ] 2.70 0.08 [.106 .003 ] ? 4.65 0.05 [.183 .002 ] ? 3.00 0.05 [.118 .002 ] 2.70 [.106] 9.78 [.385] 12.50 [.492] max. 4.75 [.187] 5.50 [.217] + 0.05 C 0.13 + .002 C .005 9.00 [.354 ] 22.75 [.896] esd orientation a guide module part number 1-1469492-x dim. a part number 8.72 1-1410710-1 .343 10.00 1-1410710-2 .394 11.60 1-1410710-3 .457 13.10 1-1410710-4 .516 dim. g part number 2.60 1-1469491-2 .102 4.20 1-1469491-3 .165 5.70 1-1469491-4 .224 dim. a part number 0 1-1469492-1 45 1-1469492-2 90 1-1469492-3 270 1-1469492-7 315 1-1469492-8 no key 1-1469492-9
162 catalog 1773095 dimensions are shown for dimensions are in millimeters canada: +1 (905) 475-6222 uk: +44 (0) 800-267666 revised 4-12 reference purposes only. and inches unless otherwise mexico/c. am.: +52 (0) 55-1106-0800 france: +33 (0) 1-3420-8686 specifications subject specified. latin/s. am.: +54 (0) 11-4733-2200 netherlands: +31 (0) 73-6246-999 www.te.com to change. usa: +1 (800) 522-6752 germany: +49 (0) 6251-133-1999 china: +86 (0) 400-820-6015 high speed backplane connectors power modules and guide hardware reference (continued) note: all part numbers are rohs compliant. 7.40 [.291] 32.00 [1.260] ? 10.00 [.394] 2.00 [.079] 1.50 0.03 [.059 .001 ] g pin part number 1410548-3 pin part number 1-1410773-x 10.8 mm wide, guide module, with keying, with esd contact 5.00 [.197] 6.00 [.236] 16.13 [.635] measured counterclockwise top of motherboard edge of daughtercard typ. ref. 3.70 [.146] ? 7.70 [.303] 4.00 [.157] 2 plcs. 12.50 [.492] 12.25 [.482] 5.00 [.197] 5.63 [.222] 10.70 [.421] 18.40 [.724] 5.50 [.217] 31.88 [1.255] 8.10 [.319] 12.25 [.482] ref. 5.63 [.222] housing contact, esd esd orientation 2 plcs. ? 3.96 0.05 [.156 .002 ] ? 3.96 0.05 [.156 .002 ] a guide module part number 1-1410297-x 5.70 [.224] 32.00 [1.260] 28.95 [1.140] ? 10.00 [.394] 4.65 [.183] 6.99 [.275] 1.50 [.059] 6.50 [.256] ? 5.55 [.219] dim. a part number 0 1-1410297-1 45 1-1410297-2 90 1-1410297-3 135 1-1410297-4 180 1-1410297-5 225 1-1410297-6 270 1-1410297-7 315 1-1410297-8 no key 1-1410297-9 dim. g part number 2.60 1-1410773-2 .102 4.20 1-1410773-3 .165 5.70 1-1410773-4 .224

▲Up To Search▲

Price & Availability of 1410200-1

	To Download 1410200-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .